The sturdy, compact Marshall MG10CD Combo Amp boasts 2 channels, a custom-voiced 6-1/2" speaker, and 10W of Marshallized power. The clean channel gives you shimmering pristine tones, and when cranked produces a musical crunch perfect for the blues. The overdrive channel kicks in a bunch of the distortion that has made the Marshall name. Emulated headphone output gives you great tone and mutes the speaker. Includes CD input. The Marshall MG10CD Combo Amp is a great amplifier for the studio, too.

Marshall MG10CD Combo Amp Features:

• 10W of power
• Custom-voiced 6-1/2" speaker
• 2 channels: clean and overdrive
• Contour control radically modifies the midrange, from traditional to scooped modern
• CD input for jam-along purposes
• Emulated line out for recording
• Emulated headphone jack for silent practice
• Compact and sturdy design
• Classic Marshall looks

Its 15W head and 2 - 10" speaker cabinets create a stack that is only 15"W x 37"H x 9"D, but the Marshall MG15MSII Micro Stack puts out a tone that's far from miniature. The head has all the standard MG features: control for clean volume; overdrive gain and volume; reverb level; and 3-way EQ with bass, treble, and a contour that lets you fine-tune the mids. It also boasts a CD input, an emulated line out, and a headphone jack that mutes the speakers.

Marshall MG15MSII Micro Stack Features:

• 15W head
• 2 - 10" speaker cabinets
• 2 channels
• Bass, treble, and contour EQ controls
• CD input
• Emulated line out
• Headphone jack with speaker muting

You can take it with you with the Marshall MS-2 Mini Amp. Classic Marshall grille cloth; crunchy distortion; and plenty of volume for good, clean fun. Controls for overdrive, tone, and volume. Powered by one 9V battery. The Marshall MS-2 Mini Amp includes belt clip and headphone jack. 5-3/4" high.

Marshall MS-2 Mini Amp Features:

• Authentic Marshall look
• Crankin' overdrive
• Tone and volume controls
• Headphone jack

The Marshall MG250DFX Stereo Combo Amp gives you plenty of that clean Marshall distortion sound. Drawing on the vast experience of the Marshall design team, the MG Series amps are built to the same exacting standards as all Marshall products. Though compact in size, each one delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording, and even live work. The MG250DFX is a 2-channel stereo amp with special features such as FDD (Frequency Dependent Dampening), CD ins, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W (2x50W) and 2 - 12" custom speakers, this is a fully gig-capable amp, and it retains all the features that make it great for practice, too. Includes footswitch.

Marshall MG250DFX Stereo Combo Amp Features:

• A compact gig rig with a big Marshall tone
• Delivers a dynamic yet toneful punch
• 2x50W stereo power
• 2 - 12" speakers
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Dampening)
• CD ins, plus emulated line out, and emulated headphone jacks
• 30"W x 24"H x 15"D

With the Marshall MG30DFX Combo you get the Marshall sound in a compact practice/backstage amp. Though small, it delivers a dynamic yet toneful punch. 30W, 10" speaker, two channels. Loaded with digital effects including reverb, delay, chorus, and flange. Includes special features such as FDD (Frequency Dependent Dampening), CD ins, plus emulated line out and emulated headphone jacks.

Marshall MG30DFX Combo Features:

• 30W
• 10" speaker
• 2 channels
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Dampening)
• CD ins, emulated line out, and emulated headphone jacks

With the Marshall MG50DFX Combo Amp you get the Marshall sound in a compact practice/gigging amplifier. Though small, it delivers a dynamic yet toneful punch. 50W. 12" speaker. 2 footswitchable channels. Loaded with digital effects including reverb, delay, chorus, and flange. Includes special features such as FDD (Frequency Dependent Dampening), CD ins, plus emulated line out, and emulated headphone jacks.

Marshall MG50DFX Combo Amp Features:

• The Marshall sound in a compact practice/backstage amp
• Delivers a dynamic yet toneful punch
• 50W
• 12" speaker
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Dampening)
• CD ins, plus emulated line out, and emulated headphone jacks

The all-valve Kerry King Signature JCM800 2203KK is the essence of simplicity-a single-channel tube amp with no reverb or effects. It's easy control panel, distinctive roar, and larger than life edge has set the standard by which many rock amps are judged.

This Kerry King model features a switchable Kerry King signature sound section called The Beast" that has two adjustable controls - Assault" & Gate." Assault" intensity controls the extent of Kerry's signature EQ boost, and Gate" is an adjustable, studio-quality, ultra-fast noise reduction unit. The 3-band EQ gives you plenty of control, but the base tone of this amp is patterned after the reverse-shape EQ setting used by Kerry himself! Eye-catching tribal graphics blaze from the front panel and baffle. Jim Marshall and Kerry King's signature's on the control panel identify its pedigree.

Marshall 2203KK Kerry King Signature JCM800 Guitar Amp Head Features:

• 100W valve head
• 4 KT88s in the power stage
• 3 ECC83s in the preamp
• Master Volume
• Preamp Volume
• Standby Switch
• 3-band EQ
• Presence control
• "The Beast" Boost
• Gate Threshold
• Assault Intensity
• Jim Marshall and Kerry King signatures on control panel
• Made in England

The Marshall Vintage Modern 2266C 50 Watt 2 x 12 is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB are catered for via rear panel switch as well as the option to completely bypass this feature if it is not required.

The Combo comes fitted with two Celestion G12C 25 Watt greenback speakers enabling stand-alone performance. There is a facility for using an extension cab if required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Combo Amp Features:

• 50-Watt valve 2x12" combo
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Celestion G12C 25 Greenbacks*
• Made in England
  
  *Note: the speakers developed especially for the Limited Edition Jimi Hendrix Super100JH stack

Marshall's AS50D is a 50-watt, 2 x 8" acoustic guitar combo amp with 2 channels, including a phantom-powered microphone channel. It features a redesigned tweeter, digital chorus and reverb, and an anti-feedback notch filter. Each channel sports its own volume, EQ, FX loop, and D.I. output. Master volume, line out and RCA inputs round things out nicely.

Believe it or not, the Marshall design team does not consist solely of metal heads, rockers and blues lovers. The award winning, critically acclaimed AS50D is proof of their diversity and expertise.

Marshall AS50D 50w 2x8 Acoustic Guitar Combo Amp Features:

• Output (RMS): 50 watt
• Channels: 2
• Speakers: 2 x 8"
• Volume: 1 per channel
• Independent EQ for each channel
• Microphone input
• Phase switch
• Phantom Power
• RCA Inputs
• Anti-feedback notch filter
• Channel Assignable Chorus
• Digital Reverb
• Master volume
• FX loop
• D.I. Outputs
• Line Out
• Polydome Tweeter

In a nutshell, the Marshall all-valve, 2-channel JVM205H 50W tube head is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410H. Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM205H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM205H all-valve amp head will give you whatever tone you need right when you need it.

Marshall JVM Series JVM205H 50W Tube Guitar Amp Head Features:

• 50W power
• All-valve, with 5 x
• 12AX7s and 2 x EL34s
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

In a nutshell, the Marshall all-valve, 2-channel JVM215C is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410C. Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM215C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM215C all-valve combo will give you whatever tone you need right when you need it.

Marshall JVM Series JVM215C 50W 1x12 Tube Combo Amp Features:

• 50W power
• All-valve, with 5 x
• 12AX7s and 2 x EL34s
• 12" Celestion speaker
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Drawing on the vast experience of their design team, the Marshall MG100DFX Combo amps are built to the same exacting standards as all Marshall products. Though compact in size, each one delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording and even live work. The MG100DFX is a 2-channel amp with special features such as FDD (Frequency Dependent Dampening), CD ins, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W and a 12" custom speaker, this is a fully gig-capable amp, and it retains all the features that make it great for practice, too. Includes footswitch.

Marshall MG100DFX Combo Features:

• A compact gig rig with big Marshall tone
• Delivers a dynamic yet toneful punch
• 100W
• 12" speaker
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Dampening)
• CD ins, plus emulated line out, and emulated headphone jacks
• Clean/Crunch switch
• OD1/OD2 switch
• FX loop level & mix control

The Marshall MS-4 Micro Stack features 2 speaker cabs with a head, and it stands only 9-3/4" high. Includes fully functioning Gain, Volume, and Tone controls. The Marshall Micro Stack is powered by a 9V battery.

Marshall MS-4 Micro Stack Features:

• Smokin' stack design
• Screamin' stack sound
• Functional gain, volume, and tone controls

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels-Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

Marshall JVM Series JVM410H Tube Amp Head Features:

• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England

Drawing on the vast experience of their design team, the Marshall MG100HDFX Head amps are built to the same exacting standards as all Marshall products. Though compact in size, each one delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording, and even live music work. The MG100DFX is a 2-channel amp with special features such as FDD (Frequency Dependent Damping), CD ins, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W, this is a fully gig-capable amp, and it retains all the features that make it great for practice, too.

Marshall MG100HDFX Head Features:

• Big Marshall tone
• Delivers a dynamic yet toneful punch
• 100W power
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Damping)
• CD ins, plus emulated line out, and emulated headphone jacks
• 25"W x 14"H x 12"D
• 39 lbs.

The Marshall MB15 is a 15 Watt combo bass amp with features that belie its size. 2 channels offer both classic and modern voicing. The Modern channel has a handy compression feature to allow you to practice with awesome, high-volume sound at a level that won't have your neighbors calling the police. The Classic channel sports the tried-and-true volume and gain knobs you know and love. A 3-band EQ allows further tone shaping, a CD-in jack allows you to easily jam with recordings, and a 1/4" line-out jack plugs you right into the PA.

Marshall MB15 Bass Combo Amp Specifications:

• 15 Watt
• 1x8" speaker
• 2 channels
• 381mm x 368mm x 241mm
• Ported cabinet
• Metal reinforced corners
• Top handle
• 1/4" input jack
• Power switch

Marshall MB15 Bass Combo Amp Features:

• Modern/Classic switch
• Modern channel: volume knob, comp knob with switch and LED
• Classic channel: gain knob, volume knob
• Equalizer: bass, voice, treble
• 1/4" jacks: Input, CD in, line out, headphones

The Marshall MB30 is a 30W bass combo amp with features that will have you grinning from ear to ear. 2 channels offer both classic and modern voicing. The MB30 amp's Modern channel has a handy compression feature to allow you to practice with awesome, high-volume sound at a level that won't have your neighbors calling the police. The Classic channel sports the tried-and-true volume and gain knobs you know and love. The Marshall MB30 amplifier's 3-band EQ allows further tone shaping, and a CD-in jack allows you to easily jam with recordings.

Marshall MB30 Bass Combo Amp Specifications:

• 30 Watt
• 1x10" speaker
• 2 channels
• 438mm x 400mm x 260mm
• Ported cabinet
• Metal reinforced corners
• Top handle
• 1/4" input jack
• Power switch

Marshall MB30 Bass Combo Amp Features:

• Modern/Classic switch
• Modern channel: volume knob, comp knob with switch and LED
• Classic channel: gain knob, volume knob
• Equalizer: bass, 3-position voice shift, voice, treble
• 1/4" jacks: Input, CD in, headphones

The 8-ohm, 120W MG412 Cabinet is loaded with 4 - 12" custom-voiced Marshall/Celestion speakers that really crank out that authentic Marshall tone. Consummately road-ready with reinforced corners, recessed and side bar handles. Angled (MG412A) configuration. 26-3/8"W x 26-3/8"H x 14"D. 65 lbs.

Marshall MG412A or MG412B 120W 4x12 Guitar Extension Cabinet Specifications:

• 26-1/2"W x 26-1/4"H x 14"D

Marshall MG412A 120W 4x12 Guitar Extension Cabinet Features:

• 4 - 12" custom-voiced Marshall/Celestion speakers
• Angled or straight-front configuration
• 8 ohm
• Handles 120W